Isolation Room

Approx. Rs 4 Lakh / PieceGet Latest Price

Product Details:

We are desing Modular Isolation room with modualr PUFF panel and HVAC system.
The same air-handling system that serves other standard patient rooms may be used for isolation rooms. The air-handling unit serving the isolation rooms requires minimum-efficiency reporting value (MERV) 7 pre-filters, with either MERV 14 or high-efficiency particulate air (HEPA) final filters. MERV 14 filters are adequate for AII negative pressure rooms and for PE positive pressure rooms when terminal HEPA filtration is used at the supply diffusers serving the PE room.

For the exhaust system serving AII rooms, the exhaust fan should be located outdoors, if possible, and be placed as far away from intakes and public areas as practical, but no less than 25 feet with discharge above the roof. For outdoor fans, all exhaust from AII rooms should be exhausted by means of a vertical exhaust stack or exhaust fan with a vertical discharge arrangement.

If the fan must be located inside, welded ductwork should be used downstream of the exhaust fan, and a bag-in/bag-out filter housing with pre-filters and HEPA filters should be installed upstream of the exhaust fan. The exhaust fans shall be served by emergency power, and the fans should be labeled as contaminated air to meet the recommendations of the Centers for Disease Control and Prevention